Home > Gps Tracking > Septic Tank Basics}

Septic Tank Basics}

Septic Tank Basics

by

Mike Eggert

Septic tanks are a necessity for many who live in rural areas, and newly developed areas that don’t yet have sewer systems in place. This article will attempt to inform you of the basics to give you a better understanding of what they are and what is required to maintain them.

A septic tank is a concrete, plastic, or fiberglass tank placed under ground with lines running from the septic tank that are called leach lines, these lines take away the excess water and deposit it under ground to drain thru the rocks and other under ground material to future purify the waste water once it leaves the tank. The septic tank will have more than one chamber. The first chamber is larger than the second, and is where most of the solids known as sludge, settle. The second somewhat smaller chamber is where the waste water is further purified. A septic tank is used in areas where no city sewers are available. They are used the same as a sewer system to dispose of waste water from bathrooms, showers and all other drains in the home. Anaerobic bacterial digestive activity on the sludge breaks it down; once this happens the sludge becomes stabilized and does not rot anymore. The somewhat purified water then moves to the second chamber. The digestion and settlement of the organic matter continues. The time in the second chamber is less than the first. This is where the waste water leaves the tank and is directed to the drain fields where any impurities that remain get decomposed naturally.

YouTube Preview Image

Some septic systems use a pump to help move the water depending on the way the land lays around the septic tank. After several years, in most cases 5 to7, the septic tank will have to be pumped to remove any sludge remaining so there is enough space to allow the digestive system to work as designed. The waste water that is pumped from the tank is released into waste treatment plants or sludge drying beds.

Maintenance of a septic system is very important and is not that hard to understand. If a system fails, the tank is most times not the problem. Usually the drain lines become plugged because the soil gets full of solids and the water does not move through it. This can be from several reasons; the tank could need to be pumped or many times the problem could be lint from a washing machine. This happens occasionally, and can be a real headache trying to correct. Most lint does not settle to the tank bottom and remains in suspension to be carried out into the drain field where over time will clog the soil. However, there is a solution. An inline filter may be used to capture lint and other items. Then only filter replacement is required to get your system back into operation.

Many times a large family will do several loads of laundry in a short period of time and flood the standard septic system. The solution here is to spread out the washing with only one or two loads a day. There are other things to consider in the maintenance of a septic tank system. If one is in your future be sure to stop by our website to learn more, and try to be on hand when the system is installed so you will have some idea how it all works.

Learn how to install, clean and maintain your

septic tank system

at

septictanks.home-lawn-garden.com

Article Source:

eArticlesOnline.com

}

Comments are closed.

TOP